To Erase an
Alarm:
Go to the
Alarm you want to
erase, then press
Enter
&
Set
simultaneously; to
exit press
Mode.
TIP 1
:
To set multiple alarms or to check your set alarms, use the
Enter
button to scroll through set
alarms. To set additional alarms go to a blank setting, then continue as in drawing #3 above.
TIP 2
: Vibration alert = 20 seconds. Press any button to stop alert. If you press the
Lite
button, it
stops the alert and engages the snooze feature - see
Note 3
below about the snooze button.
Note 1.
A set alarm will signal in all other modes unless alarm switch (on side of unit) is set to O (off). An alarm
remains set after its time has passed, and will sound again every successive day until it is erased.
Note 2
.
Set alarms are automatically organized in the order of next to go off, according to the time of day. In other
words, when you check your set alarms, ALARM 01 will be the next to signal, then ALARM 02…etc.
Note 3.
SNOOZE button
- When an alarm signals, press the light button to turn off the alarm and engage the
snooze feature; the alarm turns back on automatically after 5 minutes. You can only do this once with each alarm.
Erasing an Alarm
:
To erase an existing alarm, (a) use the
Mode
button to advance to “ALARMS SET”; (b) use the
Enter
button to
select the number of the alarm that you wish to erase; (c) Press both the
Enter
and
Set
buttons simultaneously. This will erase the
alarm’s time, and therefore will erase the alarm itself.
Changing the Time of an Existing Alarm
:
To change the time of an existing alarm, (a) use the
Mode
button to advance to
“ALARMS SET”; (b) Use the
Enter
button to select the number of the alarm that you wish to modify; (c) Use the
Set
button to change
the minutes, then press the
Enter
button to shift to the hours, which you may change with the
Set
button; (d) Press the
Mode
button to
accept the change.
pm2:53
AM -:--
ALM01-SET
Hold for 3
seconds
to enter
mode
pm2:53
8-13
ALARMS SET
Advance to
ALARMS SET
pm2:53
AM
0
:30
ALM01-SET
Advance to hours
(Note: AM/PM)
pm2:53
AM
7:30
ALM01-SET
Set this alarm
pm2:53
AM
7
:30
ALM01-SET
Adjust hours
(Note: AM/PM)
pm2:53
AM -:--
ALM02-SET
Advance to set
another alarm (to
Exit press Mode)
pm2:53
AM -:
30
ALM01-SET
Adjust minutes
Continue as in
step 3 in this
line. Finish by
setting the
alarm with the
mode button
5. How to set Alarms.
Up to 12 Alarms may be set.
NOTE
: The
Alarm auto-protect feature
requires that you hold the
Enter
button down for 3 seconds to enter the Alarms mode - see instructions below on how to do this.
Time now Alarm time being set
Alarm number
pm2:33
TIMER
R
00 : 10 : 30
Press until
R
appears in screen
How to
set
the
Timer to
Repeat
over &
over.
First set the countdown time
as shown in the above steps,
then before starting the timer,
press the "Enter" button until
R
appears in the left of the
display, then press Mode
button to start the timer.
pm2:33
TIMER
01 : 10 : 13
Press simultaneously
until display blinks
pm2:33
8-13
TIMER SET
Exit
To
EXIT
during a countdown
NOTE:
The Timer saves the last programmed time. When countdown is complete, this time is displayed. To use this time again, press
Mode
to start the timer with this time. If you wish to use this time again but have gone to another mode, go to TIMER SET via the
Mode
button, press
Enter
once and press
Mode
to start this countdown time (you can wait as long as you wish to press
Mode
to start the Countdown).
How to
ERASE
a
countdown
time and
program a
new one
pm2:33
TIMER
00 : 00 : 00
Press to erase
countdown time
pm2:33
8-13
TIMER SET
To
erase countdown
time when countdown
is not running
, advance
to Timer Set.
pm2:33
TIMER
01 : 10 : 13
Enter Timer
mode
pm2:33
TIMER
00 : 00 : 00
Press to erase.
pm2:33
TIMER
01 : 10 : 13
To
erase during a
countdown
, press
simultaneously
Then to program in a
new countdown time
proceed as shown
starting with the 3rd
drawing in the very
first line at the top of
this page
pm2:33
8-13
TIMER SET
Advance to
Timer Set
pm2:33
TIMER
00 : 00 : 00
Enter Timer
mode
pm2:33
TIMER
00 :
00
: 30
Advance to
minutes
pm2:33
TIMER
00 :
10
: 30
Select minutes
pm2:33
TIMER
00
: 10 : 30
Advance to
hours
pm2:33
TIMER
01
: 10 : 30
Select hours
pm2:33
TIMER
00 : 00 :
30
Select Seconds
(press "Enter" to
skip seconds)
4. How to use the Timer.
The Timer can be set to countdown once, or set to repeat over and over.
Hours Minutes Seconds
pm2:33
TIMER
01 : 10 : 29
Start countdown;
Countdown time in this
example =1hour, 10
minutes, 30 seconds.
When countdown = 0,
alarm vibrates or beeps
NOTE: Vibration
alert lasts for 20
seconds. Press any
button to turn off
vibration or beep.
