TIME MARK DRA-1 Quick Start Manual Download Page 2

Once the unit is attached to the Adapter, place them 

both in position next to the 35mm DIN rail.  Pull down 

on the movable part of the grip plate, and position the 

Adapter (with mounted unit) onto the DIN rail.

 

 

When the unit is in the desired position, simply release 

the spring loaded grip plate.  The top jaw of the grip 

plate should be holding the top part of the DIN rail.  The 

movable bottom part of the grip plate should be holding 

the bottom lip of the DIN rail. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TROUBLESHOOTING

 

 

If the 

DRA-1

 does not seat properly or fit onto a 

standard 35mm DIN rail, check to see that the DIN rail 
is not bent or deformed in some way. Also check for 
obstructions where there are moving parts.

 

 

WARRANTY

 

 

T

he Model DRA-1 DIN Rail Adapter 

is warranted to be 

free from defects in materials and workmanship for one 
year.  Should this device fail to operate, we will repair 
or replace it  for one year from the date of purchase.  
For complete warranty details, see the 

Terms and 

Conditions of Sales

 page in the front  section of the 

Time Mark catalog. 

DIN RAIL

GRIP PLATE

UNIT

ADAPTER

INSTALLATION

 

 

Make sure that the mounting holes, on the unit you 
will be attaching, will match up correctly to the holes 
on the adapter plate.

 

 

Using the four # 8-32 screws supplied, mount the unit 
to the DRA-1 adapter plate. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note:

 for a better grip of the unit to the adapter plate, 

Locktite (Blue Dot) is recommended.

 

DIN RAIL

GRIP PLATE

UNIT

ADAPTER

GRIP PLATE

DIN RAIL

UNIT

ADAPTER

MODEL DRA-1 

DIN Rail Adapter

 

READ ALL INSTRUCTIONS BEFORE INSTALLING, OPERATING OR SERVICING  THIS DEVICE. 

KEEP THIS DATA SHEET FOR FUTURE REFERENCE. 

 

GENERAL SAFETY

 

 

MOUNTED INSTRUMENT WEIGHT SHOULD NOT EXCEED 20 POUNDS. 

DIN RAIL END BRACKETS ARE REQUIRED WHEN MOUNTING THE RAIL IN A VERTICAL POSITION. 

THIS DEVICE SHOULD BE INSTALLED AND SERVICED BY QUALIFIED PERSONNEL. 

PROPER ATTENTION SHOULD BE GIVEN TO ANY MOVING PARTS.

 

Installation Instructions 

TIME MARK is a division of

Telephone:    Main -     (918) 438-1220 
                        Sales -    (800) 862-2875

 

Fax:                                 (918) 437-7584 
 
E-mail:            [email protected] 
Internet:         http://www.time-mark.com 

Doc No. 87A413   12/00 

© 2000   

TIME MARK CORPORATION

 

11440 East Pine Street  

Tulsa, Oklahoma  74116 

Reviews: