3
Battery Installation/Change
Main Unit
Push the catch in the direction of the arrow
on the battery cover until it releases from
the case, then push it upwards away from
the case to release the cover (see fig 2).
If necessary remove the connector from the
battery and connect a new alkaline PP3
battery, taking care to get the polarity
correct.
Install the battery in the compartment and
feed the lugs on the cover into their
respective slots on the case. Push downward
on the cover near the catch until it snaps
into place.
Remote Control
Press down as shown in fig 3 then slide out.
If necessary remove the batteries from the
compartment and insert 3 new SR44 silver
oxide batteries with polarities as shown in
fig 3. Engage the catch and the lugs on the
battery compartment cover under the case
and case slides respectively and push the
cover home.
TG123SK_Instructions.qxd 2/5/06 4:34 pm Page 3
