TIMBERWOLF
TW S426TDHB
15
SERVICE INSTRUCTIONS
WARNING
Always immobilise the machine by stopping the engine, removing
the ignition key and disconnecting the battery before undertaking
any maintenance work.
SERVICE SCHEDULE
SERVICE SCHEDULE
Check water.
ü
Check engine oil - top up if necessary (10W-30).
ü
Check for engine oil / hydraulic oil leaks.
ü
Check tyre pressure is 2.9 Bar (42 psi).
ü
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
ü
Check for free rotation of drum and hammers.
ü
Check air intake is clear.
ü
Clean air filter element.
Grease the drum bearings.
Grease the roller box slides.
ü
Grease the roller spline and bearing.
ü
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
ü
Check tension of main drive belts
(and tension if necessary).
ü
Grease discharge flange.
ü
Check anvil for wear.
ü
Grease jack stand.
ü
Check battery electrolyte level.
ü
Check for loose electrical wiring.
ü
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system.
ü
ü
Replace hydraulic oil.
ü
ü
Service tow head/adjustable tow head.
Axle maintenance.
Road brake maintenance.
Replace anvil when worn.
Daily
Check
50
Hours
100
Hours
500
Hours
1
Year
RETURN TO DEALER FOR ANVIL CHANGE
OR
OR
SEE
MANUFACTURERS
SHEET FOR DETAILS
OR AS REqUIRED - SEE PAGE 22
OR AS REqUIRED - SEE PAGE 22
GREASE DAILY OR AS REqUIRED WITH
INFREqUENT USE - SEE PAGE 21
DEPENDING ON WORKING ENVIRONMENT
NOTE:
Your Timberwolf shredder is covered by a full 12 months parts and labour warranty. Subject to
correct maintenance and proper machine usage, the bearings are guaranteed for 12 months
regardless of hours worked by the machine. In conditions of 'heavy usage' - i.e. in excess of 500 hours
per year - it is recommended that the bearings are changed annually to ensure that the machine retains
optimum working performance.