Timberwolf TW 280TFTR, Instruction Manual

Page: 18 / 67

TIMBERWOLF
TW 280TFTR
15
WARNING
Always immobilise the machine by stopping the engine, removing
the ignition key and disconnecting the battery before undertaking
any maintenance work.
SERVICE SCHEDULE
SERVICE INSTRUCTIONS
SERVICE SCHEDULE
Check water.
ü
Check radiator is clear.
ü
Check engine oil - top up if necessary (10W-30).
ü
Check for engine oil / hydraulic oil leaks.
ü
Check fuel level.
ü
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
ü
Check blades.
ü
Clean air filter element.
Check safety bar mechanism.
ü
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
ü
Grease discharge flange.
ü
Check tension of main drive belts
(and tension if necessary).
ü
Grease the roller box slides.
ü
Grease the roller spline and bearing.
ü
Check anvils for wear.
ü
Check fuel pipes and clamp bands.
ü
Check for loose electrical wiring.
ü
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system.
ü ü
Replace hydraulic oil.
ü ü
Replace fuel pipes and clamp bands.
Check coolant.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn.
Daily
Check
50
Hours
100
Hours
500
Hours
1
Year
REFER TO YOUR ENGINE
SUPPLIERS MANUAL
DEPENDING ON WORKING ENVIRONMENT
OR
OR
RETURN TO DEALER FOR ANVIL CHANGE
NOTE: Your Timberwolf woodchipper is covered by a full 12 months parts and labour warranty. Subject to
correct maintenance and proper machine usage, the bearings are guaranteed for 12 months regardless of hours
worked by the machine. In conditions of 'heavy usage' - i.e. in excess of 500 hours per year - it is recommended
that the bearings are changed annually to ensure that the machine retains optimum working performance.
OR AS REqUIRED - SEE PAGE 21
OR AS REqUIRED - SEE PAGE 21