4
Attach Hinges to Aluminum Side Rails
gate opening, determine the desired hinge location. Hinges can be placed either in
the open position when the gate is closed or in the closed position when the gate is closed (typical for a door).
•
Drill 7/64” pilot holes and use 3/16” x 1” self-drilling screws to attach hinges to the aluminum Side Rails.
5
Attach Gate to Post
•
After positioning the gate to the desired height, pre-drill the Post Cover using a 7/64” drill bit. Attach the gate to the
post using the 3/16” x 2” flat head screws, installing the screws closer to the center of the post first.
•
Install Tip: Add temporary support blocking under the gate to help hold the gate at correct height.
6
Attach Latch and Latch Stop
•
Position the gate latch on the Post Cover. Pre-drill the Post Cover with a 7/64” drill bit. Install the Latch with the Latch lever
up, using the provided screws. Position the Latch Stop on the aluminum Side Rail. Drill a pilot hole in the Side Rail with a
7/64” drill bit. Attach the Latch Stop using the 3/16” x ¾” self drilling screws.
Installing a Gate: Continued
3/16” x 1” Self Drilling
Screws (black)
Hinge
Temporary Support Blocks