Timberland 15378J, Instruction Manual

Page: 4 / 42

STOPWATCH
- The maximum counting time for the stopwatch is 23 hours 59 minutes and 59 seconds.
- Press Key-D to start and stop counting. When stopped, press Key-C key to reset.
- When it is counting, press Key-C to take Lap time, there are maximum 99 Laps.
- Press and hold Key-A for 2 seconds to check the Lap time (only if a Lap is recorded)
- Press Key-D and Key-C to review the Lap time in ascending or descending order respectively.
- To exit the Lap review mode press and hold Key-A for 2 second or just press Key-B.
WORLD TIME MODE
- There are 28 time zones available to be selected.
- Press Key-D and Key-C to change the time zone in ascending and descending order respectively.
- Press and hold Key-A to turn On and Off the DST for the selected time zone.
BAROMETER
Weather forecast:
A - If the chart is going down, the weather is probably worst than now.
B - If the chart is going up, the weather is probably better than now.
C - If the chart is stable, the weather is probably unchanged.
- Press Key-D to toggle the display of pressure figure or the chart of previous 21 hours.
COUNTDOWN TIMER
The maximum counting time for the timer is 99 hours 59 minutes and 59 seconds.
- Press and hold Key-A for 2 seconds to enter the setting mode. The setting sequence is:
Hour > Minute > Second > “Loop counting”
(When Loop counting is selected, the “ ” icon will be shown, the counter will continue countingafter it
reached to zero.)
- Press Key-C and Key-D to adjust the value in descending and ascending order respectively. Press Key-B to
confirm and change to set the next item.
- Press Key-A to exit the setting mode.
- Press Key-D to start and stop counting. When stopped, press Key-C key to reset.
- When the counter reached to zero, it will ring for 30 seconds.