Timberkits Vintage Car, Instructions Manual

Page: 45 / 48

43
57
58
57a
57b
10
10
29
29
Place, but do not glue, the body in position on the thighs.
Turn the handle, whilst holding the body down, and check that the lower arms
rise and fall either side of the steering wheel at a realistic height.
You might need to trim a small amount off the 3mm x 145mm pegs if they
rise too high.
Then glue the body in place on the thighs.
Tip: Position the body slightly to one side and
you can get one hand to brush against and turn
the steering wheel with each turn of the handle!