TIMBERKING Pneumatic Chainsaw Operating Manual V3 | 20.04.15
13
3.
Pull chain around by hand.
FIGURE 7
4.
Lift bar and tighten mounting bolt.
FIGURE 8
AFTER MOUNTING A NEW CHAIN
1.
Allow chainsaw to run for a short period of time at low speed
while applying a liberal amount of oil to the chain.
2.
Turn off motor and re-adjust chain tension. Re-start saw and
make a few light cuts. Re-adjust chain again if necessary. It is
important to monitor chain tension during the first half-hour of
operation.
