Timberk TOR 22.1507 AXX I, Instruction Manual

Page: 6 / 16

www.timberk.com • electric oil filled radiator
6
After end of life the fan heater should be utilized in accordance with the
norms, regulations and procedures effective in the place of utilization. For
more detailed information please contact representatives of local authorities.
9. UTILIZATION
1. Remember that you must clean the unit regularly to remove dust from
the surface of heating sections. Dust and dirt on the unit’s surface have
a negative effect on the unit’s operational efficiency, in some cases a
smell of burning dust can cause a headache and nausea, as well as other
negative health effects. Also a dirty unit cannot operate 100% effectively,
temperature parameters of the room heating can be disrupted.
2. Prior to preventive cleaning of the unit, you must switch off the unit,
unplug it from electric mains (see «Important precautions») and let the unit
cool down.
3. Clean the unit’s sections and other surfaces with a soft, slightly damp
duster/cloth. The cloth must not leave fluff on the unit’s surface.
4. It is not recommended to use detergents, including materials containing
abrasive elements.
5. During cleaning, please, do not damage the unit’s surface by sharp
objects (hard sponge, polishing paper, etc). Scratches on the painted
surface can result in rusting.
Switch on and use the unit again only having carried out all «Important
precautions»; also make sure that the unit’s surface is absolutely dry.
8. CLEANING AND MAINTENANCE OF THE UNIT
11. TRANSPORTATIOM AND STORAGE
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse at the temperature
not lower than -30°
Possible malfunctions and remedies for them:
If you are not able to remedy a malfunction according to the
recommendations or other malfunctions occur, contact the authorized
service center of Timberk.
10. TROUBLESHOOTING
Malfunction Cause Remedy
1. The heater heats poorly
1. The heating element is faulty
1. Contact the authorized service center
of Timberk
2. Low voltage in the electric mains 2. Check voltage in the electric mains
2. The heater does not work
1. No voltage in the electric mains
1. Check presence of voltage in the
electric mains
2. Breakdown of the electric cable
2. Check integrity of the electric cable and
replace it if necessary
3. The automatic circuit breaker of the
electric mains is faulty
3. Check operability of the automatic circuit
breaker of the electric mains and replace
the faulty circuit breaker if necessary
4. Breakdown in the heating element circuit
4. Contact the authorized service center
of Timberk
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
3.
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°C to +50°C
15% to 85%
(no condensate)
IMPORTANT!
For the unit to operate normally, the level of voltage in
electric mains must be sufficient in strict compliance
with the technical parameters indicated on the unit.
Carefully study the technical label, as well as all labels
with special warnings, attached to the unit’s surface.