www.timberk.com • electric humidifier
5
5. LIST OF PARTS
1. Air humidifier – 1 pc.
2. Instruction manual and warranty card - 1 pc.
3. Package – 1 pc.
1. Remove the top cover of the appliance.
2. Fill the tank of about 1.8 liters of water, not higher than the maximum
water level scale «MAX». Also for the fragrance can be added to water
several flavor oil droplets.
3. Install the top cover of the appliance.
4. Plug the power cord into an electrical outlet
Touch the button on / off and intensity of selection the steam from the
backlight.
Used to turn on / off the device, select a pair of output intensity: off, low,
medium, high and control backlit water tank.
The button lights up green when the device of the low-intensity pair of blue
when the unit with an average output intensity pair, red when the device
with high intensity output of steam and flashes red when there is no water.
6. FILLING THE WATER TANK
7. APPLIANCE OPERATION
Control panel
Fig. 2
1
Switching on device
Install the device vertically on a flat, dry surface and then connect the
device to the mains, after filling the tank with water. Press the touch button
« ». The device will turn on with low volume vapor to escape from sprayer
will steam.
At the beginning of this operation, the spraying rate may be unstable, due
to the difference in quality and temperature water. It will take a short time to
ensure that this process is stabilized.
Adjustable steam output intensity
To change the output intensity of the steam press button « » on the
control panel several times, the output intensity of the pair will change: off,
low, medium, high, and the button will light up in different colors.
Comfortable conditions are achieved at a relative humidity air from 40 to
60%. You can determine favorable for you humidity levels for their own
feelings, or use for this special instrument hygrometer (sold separately),
which measures the level of relative humidity.
Automatic shut-off at the places without water
By lowering the water level in the reservoir below the minimum permissible
direct ultrasonic membrane device will automatically shut down, you will
hear a beep and the control panel will button flashes red. To continue the
operation of the device you need to fill the water tank according to claim 6,
«Filling water tank», and then connect the device to an electrical network.
Ionizer
When you turn on the device, an ionizer starts. After 10 minutes, the ionizer
stops working automatically. Turn the unit off and then turn it on again, the
ionizer will be re-run for a further 10 minutes.
The ionizer generates negative ions (anions) and freshens the air in the
room. The anions strengthen the nervous and circulatory system, improve
the activity of the lungs and provide effective protection against respiratory
diseases (such as asthma and pneumonia). The anions purify the air of
dust and smoke.
Color highlighting for the tank water
When you turn on the device lights up lights for the reservoir water, the
colors change in turn.
Press and hold the « » for 3-5 seconds to lock the desired color.
Press and hold the « » again for 3-5 seconds to cancel color fixation.
Press and hold the « » for 3-5 seconds for the third time to turn off the
backlight of the tank.
Summary of Contents for THU UL 26 (BW)
Page 24: ...www timberk com ...