Timberk TEC.E15 DG 2000, Instruction Manual

Page: 3 / 28

www
.timberk.com • electric convector heater
3
IMPORTANT!
These factors should be considered by a person, who
is interested in the proper operation of the appliance.
The manufacturer is nor responsible for damage of the
appliance or its parts during transportation, as a result
of incorrect installation or voltage fluctuations, as well
as when any part of the appliance has been changed
or modified.
When using the convector heater several safety precautions should be
followed. Incorrect operation due to disregard to precautions may cause
harm to health of the user and other persons, as well as damage to their
property.
1. Read all the instructions before using the convector heater.
2. The convector is very hot when in use. To avoid burns, do not let bare
skin touch hot surfaces.
3. The appliance should not be located near highly flammable and
deformable objects.
4. Make sure that the appliance case and heating element are cool before
it will be dismantled and laid into the package for extended storage.
5. When the appliance is not used for a long time, keep it in cool dry
place in the original carton.
6. DO NOT COVER THE APPLIANCE, when it is operating. Do not dry
your clothes and any other fabrics and materials on it. It may result
in its overheating, breakdown or cause considerable damage to you
and/or your property.
2. SAFEGUARDS
IMPORTANT!
The manufacturer considers this type of failure a non-
guaranteed event.
7. The appliance should always be closely supervised, especially when
it is used near children. Take care that children do not touch the
appliance.
8. Always unplug the convector heater when not in use.
9. The appliance is equipped with a Euro-plug with earthing contact. The
plug should fit the standard Euro-outlet. If it cannot be plugged into
the outlet or plugged with difficulty, turn it through 180° vertically and
try again. If it is impossible to plug it easily after that, call an electrician
to replace the outlet. Never use the appliance when incompletely
plugged.
10. Never plug the appliance with wet surface.
11. Never use the appliance, when it may have a contact with water.
12. When the appliance is turned on and operating, do not touch its
surface and the surface of control unit with wet hands and other parts
of your body.
13. Do not operate convector heater with a damaged power cord or
plug. To avoid the damage of electric shock, damaged cord should
be replaced only in authorized service centers of the manufacturer by
qualified specialists.
14. Never try to repair the convector heater by yourself. It may cause harm
to your health and affect the warranty service of the appliance.
15. Do not use the convector heater in open spaces outdoors.
16. It is forbidden to install or use the appliance in bathrooms, shower
rooms or swimming pools in places where water sheets or drops may
fall on its surface when the appliance is switched on.
17. Do not run cord of the radiator under carpeting and do not press it with
furniture. Arrange cord where it will not be tripped over.
18. To shut-off the appliance set the side switch on control panel to ‘off’
position (0) and unplug it. Never pull the power cord or unplug it
suddenly.
19. Do not insert your fingers and do not allow foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock or
damage the convector heater.
20. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not dry your clothes on the convector heater! 13. Do
not switch on the convector if its power cord or plug is damaged. To
prevent electric shock, the damaged power cord must be repaired
only in authorized service centers of the manufacturer and by skilled
specialists.