Timberk TCH Q1 800, Instruction Manual

Page: 11 / 32

IM2021
11
may lead to its overheating, breakdown or infliction
of a significant damage to you and/or your property.
ATTENTION!
The manufacturer considers this type of failure as a
nonguaranteed event.

The heater should be connected to the electric
mains equipped with an automatic circuit breaker.

Never connect the heater to the electric mains, if its
surface is moist (wet).

Never try to repair the appliance yourself or replace
any parts. If you detect any faults, please contact
the nearest Service Center.

It is prohibited to use the heater in rooms with
explosive, dusty, or corrosive environment.

Exclude operation of the heater without grounding.

It is prohibited to switch on and use the heater with
the removed cover.

It is prohibited to install and use the heater in
bathrooms, showers, or near swimming pools,
where water jets and drops may directly get onto the
appliance surface, when it is switched on.

It is prohibited to use the heater in dusty rooms and
during redecoration.

It is prohibited to touch the heating element of the
heater (switched on).

Use the heater only as described in this manual.
Any
other use not recommended by the
manufacturer may lead to fire, electric shock, or
personal injury.

Never clean the heater, when it is connected to the
electric mains.

For normal operation of the heater, the mains
voltage should be sufficient, and the mains