Timberk TCH A9 1000, Instruction Manual

Page: 4 / 28

www.timberk.com • electric ceiling heater
4
Technical specifications
Table 1
Наименование
Eд.
Изм.
Модель
TCH A9 1000 TCH A9 1500 TCH A9 2000 TCH A9 2500 TCH A9 3300
Power supply V/Hz 220~/50 220~/50 220~/50 220~/50 220~/50
Rated power
consumption
W 1000 1500 2000 2500 3300
Rated current А 4,5 6,8 8,2 10,9 14,5
Water protection
class
- IP65 IP65 IP65 IP65 IP65
Electric protection
class
-
Class I Class I Class I Class I Class I
Heating area m 2 10-12 15-17 18-20 23-25 31-33
Rated suspension
height
m 2.5 2.7 3.0 3.5 3.8
Dimensions mm 160x700x50 160x980x50 160x1160x50 160x1440x50 160x1850x50
Net kg 3,3 4,2 4,9 5,9 7,5
NOTE:
Heated area in the table is indicated for reference, since it depends
both on the heater power, and on room type, ceiling height, wall/
ceiling materials, number and area of glazing, presence of doors,
etc.
* - You can only choose between 2 power modes by using the block of remote control. It
doesn’t belong to standart set, should be bought separately.
IMPORTANT!
The manufacturer reserves the right to change the set-list of the
device (including liquid and powder components) for different
supplies without prior notice. The changes either in no way influence
the basic technical parameters of the device or may improve them,
and also not violate the legislation or quality standards of the
countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight
and dimensions of the device, but not more than by +\- 5-20%
(depending on the product category)
4. INFRARED HEATER DESCRIPTION
Fig.1
1. Radiating board
2. power cords
3. Cover
1. Infrared heater - 1 pc.
2. Set of fasteners - 1 pc.
3. Operation manual and warranty certificate - 1 pc.
5. DELIVERY SET
NOTE:
To improve the product quality, the design and
technical specifications of the infrared heater, as well
as its delivery set can be modified by the manufacturer
without preliminary notification.