Timberk TAP FL600 MF BL, Instruction Manual

Page: 6 / 24

www.timberk.com • electric air purifier
6
ATTENTIONS!
• The collector cell may not require if «arcing» occurs.
Arcing is a snapping sound that occurs when large
particles are collected in the collector cell or the
appliance used in over-damp rooms.
• If prolonged or continuous arcing occurs, the
collector cell should be cleaned.
• To prevent damage to the components of the
collector cell, do not put in dishwasher or use a cotton
swab.
• Tough residue such as tar from tobacco smoke may
need additional cleaning or longer soaking.
• The collector cell must be completely dry after
cleaning in order to operate properly. If the power
supply detects the collector cell is wet, it shuts down
power to the cell and cause the red «CLEAN CELL»
indicator to blink rapidly. Please re-dry the collector
cell until the power supply successfully restarts, the
appliance will return to its original speed and run as
normal.
Cleaning the Pre-Filter
1. Unplug the appliance.
2. Open the cover from the right side by pressing the switch.
3. Pul the pre-filter straight and let it air dry before placing it back in the
cabinet. Do not use heated or compressed air as part of the drying process.
4. Insert the pre-filter back into the unit.
5. Close the cover securely.
Cleaning the Exhaust Grille
1. Remove the cleaning brush from the storage slot located under the cover.
2. Brush away debris that has collected between the grille slots.
3. Return the cleaning brush to the storage slot.
Fig. 3
Fig. 4