Timberk T-CH1.2-A11, Instruction Manual

Page: 11 / 36

IM2021
11

Do not use accessories not included in the delivery
set.

When unplugging the appliance, do not pull the
power cord but the plug. Do not twist or wrap it
around anything.

The temperature of the heating element during
operation of the heater may reach very high values.
To avoid burns, do not touch the appliance surface
by hand and other body parts. It is also necessary to
exclude the possibility of touching the heater
radiating boards by a person (including accidental)
via proper instructions and allocation of the heater in
an inaccessible place.

The heater should be placed far from curtains,
flammable and easily deformable objects.

The power cord should not contact sharp edges and
hot surfaces.

Make sure that the heater body and its radiating
boards get cold before demounting and placing the
heater to the package for long storage.

During demounting of the heater or its movement,
take special precautions to exclude hits of the
appliance and its falling.

When the heater is not used for a long time, keep it
in dry cool place in the factory cardboard package. If
the product was stored at a temperature below 0º C
for some time, it should be held in room conditions
for at least 2 hours before turning on.

ATTENTION! DO NOT COVER THE APPLIANCE
when it is switched on. Do not dry clothes or any
other fabrics or materials on the appliance. This
may lead to its overheating, breakdown or infliction
of a significant damage to you and/or your property.