IM2019
21
Note:
In the fan operation mode, the temperature settings are non-effective.
Cooling/Heating mode
1. Press the MODE button, select the Cooling or Heating operation mode.
2. Press “COLD” or “HEATING” buttons to operate these modes quickly.
3. By pressing the «
» or «
» button, you can set the temperature range from 16°C (60°F)
~ 32°C (90°F), the display changes as you touch the button.
4. By pressing the SPEED button, you can select the fan speed from LOW, MID, HIGH, AUTO.
5. Press the ON/OFF button, the air-conditioner starts to operate.
6. Press the ON/OFF button again, the air-conditioner stops.
Note:
In the fan operation mode, the temperature settings are non-effective.
Fan operation mode
1. Press the MODE button, select the fan operation mode.
2. By pressing the SPEED button, you can select the fan speed from
AUTO; LOW; MEDIUM;
HIGH.
3. Press the ON/OFF button, the air-conditioner starts to operate.
4. Press the ON/OFF button again, the air-conditioner stops.
Note:
In the fan operation mode, the temperature settings are non-effective.
Drying operation mode
1. Press the MODE button, select the drying operation mode.
2. Press the ON/OFF button, the air-conditioner starts to operate.
3. Press the ON/OFF button again, the air-conditioner stops.
11. MAINTENANCE
Before cleaning unplug the conditioner.
Cleaning of the indoor unit and remote control board:
• Indoor unit and remote control should be cleaned with a dry soft cloth.
• If the indoor unit is too unclean, moisten the cloth and squeeze it well.
• In order to avoid the damage of paint or parts of the conditioner, do not clean it with brushes
and do not leave them on the surface of indoor unit.
• In order to avoid the damage of surface or deformation of the conditioner parts, do not clean it
with petrol, solvents, cleaning powders or other chemically active substances.
