www.timberk.com • Electric drier for changing of air humidity
7
the previous function setting automatically when the power resumes.
Setting the Timer
• When the unit is on, first press the Timer button, the Timer Off indicator
light illuminates. It indicates the Auto Stop program is initiated. Press it
again the Time On indecator light illuminates.It indicates the Auto Start is
initiated.
• When the unit is off, first press the Timer button, the TIMER ON indicator
light illuminates. It indicates the Auto Start program is initiated. Press it
again the Time Off indecator light illuminates.It indicates the Auto Stop is
initiated.
• Press or hold the UP or DOWN pad to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start.
• The selected time will register in 5 seconds and the system will
automatically revert back to display the previous humidity setting.
• When the Auto start & Auto stop times are set, within the same program
sequence, TIMER ON OFF indicator lights illuminate identifying both ON
and OFF times are now programmed.
• Turning the unit ON or OFF at any time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop function.
• When LED display window displays the code of P2, the Auto Start/Stop
function will also be cancelled.
Dryer mode(optional)
The unit can make the MAX dehumidification function when it is under the
Dryer mode. The fan speed is fixed at high fan speed. The humidity level is
automatically controlled according to the actual room humidity.The unit will
quit dryer mode after a maximum 10 hours’ operation.
NOTE:
•
The Dryer mode must be operated in a close room,do not
open the door and window.
•
To make the best effective dehumidification ,please first
dehydrate the wet clothes.
•
Make sure to direct airflow at the wet clothes (See Fig. 5).
•
For thick and heavy wet clothes may not get the best
effective dehumidification.
CAUTION!
• Do not cover the air outlet of the unit with clothes. It
may cause excessive heat, fire or failure of unit.
• Do not place the wet clothes on the top of the unit
and do not make the water drop into the unit. It may
cause electric shock,creepage or failure of unit.
Fig. 5.
Summary of Contents for DH TIM 20 E7
Page 32: ...www timberk com ...
