Timberk AC TIM 07H S26, Instruction Manual

Page: 8 / 36

www.timberk.com • electric air conditioner
8
4,5. Buttons up, down The «up» button (4) - the tempera-
ture will rise by 1 °C. The «down» button (5) - the tempera-
ture will drop by 1 °C. The temperature setting range is from
16 °C (60 °F) to 32 °C (90 °F).
6. SWING - Horizontal rotation mode (in this model the
function is not provided). Controlling the direction of the airfl
ow horizontally. Press this button to activate le / right in the
SWING mode and re-set the SWING mode.
7. SWING (Vertical rotation mode). Controlling the direction of
the airfl ow along the vertical. Press this button to activate up
/ down in the «SWING» mode and re-set the «SWING» mode.
8. TURBO mode. Automatic operation of maximum cooling
(in cooling mode) or maximum heating (in heating mode).
9. TIMER. Setting the on/off time of the air conditioner by timer
10. iFAVOR. Return the device to the user’s previous per-
sonal settings (option is not supplied in this model).
11. iFEEL. Click this button to display temperature settings
in the control panel for a comfortable temperature. The
remote-control sensor measures temperature of the room
and sends data to the indoor-unit. So set temperature is es-
tablished near the remote-control, not near the indoor unit.
The second press adjusts the pre-set temperature.
12. HEALTH. Activating the ionization function (option is not
supplied in this model).
13. SLEEP. Click it and temperature will decrease on 2 de-
grees during 10 hours. After this time expires, the device will
return to automatic mode. The speed of fan also gets lower,
so the noise level decreases too.
14. iCLEAN. This function gives opportunity to prevent fun-
gus appearance by drying moisture from the indoor unit of
the split-system(using drying, purging and heating the mod-
ule). «ICLEAN» mode works for about 30 minutes.
15. ANTI-FUNGUS. Starting the automatic drying mode of
the indoor unit.
16. DISPLAY. Press this button to turn on/off the display.
Indication of the control board display shall correspond to
selected modes.
Work with remote control board
Mounting and replacement of batteries: mount two LR03
alkaline batteries, according to polarity indicated on the re-
mote control board.
In order to avoid malfunction of the remote control board
do not insert used batteries or batteries of various types.
If the conditioner is not used for a long time, remove batter-
ies from the board or else electrolyte may leak and damage
the board.
In normal operation of the conditioner average service life of
batteries will be about a half-year.
Replace batteries, if command receiving is not confirmed with
an audio signal, or if the display does not show a sign of com-
mand transfer. When generating commands from the remote
control board, point an IR-radiator at a remote-control signal
receiver situated on the indoor unit. Hold the remote control
board at the distance of no more than 8 m from the indoor unit.
AUTOMATIC OPERATION MODE
1. Press the «MODE» button, select the automatic opera-
tion mode.
2. By pressing the «SPEED» button, you can select the fan
speed from LOW, MID, HIGH, AUTO.
7. OPERATING MODES