background image

3

www.timberk.com

   

i

nstant 

water heater

ENGLISH

.

 OPERATIONAL CHARACTERISTICS

WATERMASTER I Series. Water Heater Models: WHE 3.5 XTR H1, WHE 4.5 
XTR H1, WHE 5.5 XTR H1

1.   Instantaneous water heating without preprocessing and waiting.
2.   Reliable nichrome spiral heating element with ceramic protection; 

the special shape prevents significant accumulation of scale.

3.   Automatic temperature protection (electronic temperature sensor) 

protects water heater from overheating, and assures user protec-
tion against burns.

4.   Hydraulic

 

flow

 

sensor

 

automatically

 

stops

 

the

 

heating

 

mode

 

when

 

cold

 

water

 

supply

 

is

 

suddenly

 

interrupted

 

or

 

water

 

pressure

 

in

 

the

 

system

 

drops

 

below

 the 

working

 

level

.

5.   The water heater is designed for household application, for one 

water consumption point and can be installed in any convenient 
place.

6.   Ultra-thin and space-saving design is ideal for installation and use 

both in a city apartment, and a country-side house. And quicker 
and safer heating combined with notable electric power saving, 
which means less costs, will be pleasing you during the whole life-
time of TIMBERK water heater.

WATERMASTER

 

II

 

Series

Water

 

Heater

 

Models

WHE

 5.0 

XTN

 

Z

1, 

WHE

 6.0 

XTN

 

Z

1, 

WHE

 6.5 

XTN

 

Z

1, 

WHE

 7.0 

XTN

 

Z

1, 

WHE

 8.0 

XTN

 

Z

1

1.   Instantaneous water heating without preprocessing and waiting.
2.   Reliable nichrome spiral heating element with ceramic protection; 

the special shape prevents significant accumulation of scale.

3.   Temperature protection (temperature switch) protects water heater 

from overheating, and assures user protection against burns.

10. Do not use the water heater for purposes not specified in this in-
struction manual.
11. Do not use the water heater in explosive or corrosive environment. 

Do not store gasoline and other volatile highly inflammable liquids 
near the appliance. This is very hazardous!

12. It is prohibited to change the design of the water heater or modify it.
13. Any service works shall be performed by a specialized organization, 

by qualified specialists. Improper installation may result in refusal of 
warranty service.

14. The water heater is not designed for use by people (including chil-

dren) with physical, sensory, or mental disability, having insufficient 
experience and knowledge, without observation and instructing on 
use of the appliance by the person responsible for their safety. It is 
necessary to watch children not to play with the appliance.

15. Do not use the water heater with the damaged electrical cable or 

other damages. For troubleshooting and repairs, please contact the 
nearest authorized service center of the manufacturer in your region.

16. Make sure that the electrical cable does not cross sharp edges and 

does not contact with hot surfaces.

17. Never leave the energized water heater unattended.
18. Do not allow children to use the water heater without supervision by 

adults.

19. Thoroughly observe the connection procedure of the water heater, 

since improper connection will result in its failure and may inflict 
harm to the user.

20. Do not swap locations of the water inlet and outlet positions, since 

this will result in failure of the water heater and may inflict harm to 
the user (see IN (inlet) and OUT (outlet) marks). The water heater 
shall be connected only with its water connections downward in 
strictly vertical  position. Connection of the water heater in another 
position will result in its failure. The water heater shall be operated 
only with the original shower nozzle excluding its clogging.

21. The water heater is designed only for heating of water. Do not use 

the product for heating of other liquids. This may inflict a severe dam-
age to the water heater.

22. Do not connect electric wires of the device to a water pipeline, a gas 

pipeline, etc.

23. Make sure in proper connection of electric wiring (including connec-

tion to the grounding loop).

24. Inlet temperature of water shall not 35°C.

25. For use of the water heater in a bathroom, it is recommended to 

install it above body height so that water splashes do not get onto 
its enclosure.

26. It is prohibited to splash water onto the heater or irrigate it.

27. It is prohibited to: pull electric wires inside the water heater.

ATTENTION!

The water heater shall be certainly grounded.

Summary of Contents for 0 XTNZ1





































Reviews: