2
performance of daily living activities. Rotating seat can be locked in
desired position what provides safer and more comfortable bathing as
well as getting in and out of the bath.
3.
Assembly
The width of chair should correspond to the width of the bath; anti-
sliding tips should fully touch the edge of the bath.
Step 1.
Place the lower frame on the bath.
Step 2.
Adjust the clamps with the use of wing screws so that the
frame is stable and does not move on the bath edges.
Step 3.
Unscrew mounting screw which is located on the upper frame
under the seat. Join lower and upper frame and put them on the
mounting element. Tighten mounting screw.
Step 4.
Pull upwards adjusting lever, set upper frame in desired
position and lower the lever so that the locking pin clicks.
Step 5.
Ensure all elements are assembled correctly and frame is set
properly.
4.
Technical data
Overall width
74 cm
Inner width
58 cm
Depth of frame
13 cm
Seat dimensions
40 x 32 cm
Weight
5 kg
Maximum capacity
100 kg
5.
Notes
imago International Group does not bear responsibility of improper
use of the bathtub chair, failure to comply safety regulations and
misuse.
