5
INSTALLING OF WOOD BURNING STOVE
Unpacking and installing
TIM SISTEM is packing your stove with care so it could be savely transported. However, some damage can
occur during transport.
When you receive your stove, unpack it carefully, inspecting your stove and all parts for damage. Make
sure that all parts are included in the box. If any parts are damaged or missing, please contact your dealer
immediately.
After choosing an appropriate spot, inspect this location to make sure that the stove will have enough
clearance to combustible materials. These combustibles can include walls, floor, ceiling, cabinets, fireplace,
and chimney. You must carefully consider the clearances to all of these combustibles before actually
connecting your stove. When considering these clearances, also decide the kind of floor the stove will rest
on. Depending on your floor, you can install your stove as it is, or use a floor protector, some types of
flooring may require additional floor protection. A floor protector is any noncombustible surface laid on the
floor underneath the stove that extends, 50cm beyond the fuel loading door and 10cm beyond each side of
the stove
PRECAUTION MEASURES
Read and understand this Owner's Manual thoroughly before installing and using CAROBNA PEC
wood stove
.
Make sure to install your stove:
According to the manufacturer's recommendations.
In accordance with all applicable codes.
With the proper sized chimney.
When using your stove:
Warn children and others unfamiliar with wood-fired stoves about the danger of touching hot,
radiating surfaces of your stove. For your additional safety, obtain hearth and stove guards through
your local dealer.
Keep pets away from the stove to prevent unnecessary hazards.
Burn natural wood or briquttes only. Higher efficiencies and lower emissions result when burning air-
dried, seasoned wood, as compared to green or freshly cut wood.
Use caution when loading firewood into a hot stove.
Keep the fuel loading door closed at all times except when loading wood.
Keep the ash pan fully inserted.
Clean the surface regularly.
Never modify this stove in any way.
Never burn kiln dried wood, painted or treated wood, solvents, trash, plywood, colored or
glossy paper, artificial logs, cardboard, coal, garbage or driftwood.
Especially, do not burn coal in this stove!