Tilia CTC Maxi 100, Installation, Operating And Maintenance Instructions

Page: 12 / 24

3. INSTALLATION
3.1 PLUMBING SYSTEM
Important
Installation must be performedby technically qualified personnel.
10
Applicable installation standards are
for boilers in heating systems that
use pressurised hot water with
temperatures below the boiling point
at atmospheric pressure.
WARNING
CTC Maxi boilers have a
maximum 5 bar operating
pressure.
Consequently, make sure that the
hydraulic pressure measured
downstream from the pressure-
regulating valve on the supply
pipeline is not greater than this
0
10
20
30
40
50
60
70
80
4000 5000 6000 7000 8000 9000 10000 11000 12000
WATER FLOW RATE (Kg/h)
LOAD LOSSES (mbar)
CTC Maxi boiler water load losses
pressure.
Also, check that this maximum
pressure is not exceeded when the
heating system is at operating
temperature.
Check that boiler relief valve drains
are correctly connected to drain pits.
Boiler load losses are indicated in
the following chart, in function of the
flow rate of water in circulation.