Multi WAN Residential Gateway
10
Svenska
English
Multi WAN Residential Gateway
11
Connecting the LAN
1. Connect a network cable
between the yellow network port
(LAN 1-4) and the network port on
the back or side of your computer
or the device you want to connect.
If you have more devices, use LAN2,
LAN3 and LAN4.
2. Finally, plug the power adapter into
an electrical outlet and the contact
into the router where it is labeled
“POWER” and press the power button
on the back of the router to turn on
the device.
3. Start the computer or the device you
have connected.
4. The Status-, Internet-, WAN- and
WiFi-lights will shine a constant
green on your router when the
installation is complete.
Connecting the WiFi
1. Make sure that the WiFi light (see
picture labeled ”Front”, WiFi) on your
router is lit green. If it isn’t lit: press
the WiFi-button on the back of the
router to active WiFi.
2. Make a search for wireless networks
on your computer or the device you
want to connect.
3. Compare the list of network names
(SSIDs) with the name shown on
a sticker on the bottom of the router.
4. Connect by double clicking on the
correct SSID and then enter the
password. This can be found on
the sticker labeled ”WPA key” on the
bottom of the router. The password
must be typed exactly as written, i.e.
uppercase and lowercase letters.
Description of the front panel
Graphics on the front panel:
1. Status
Green light:
The power is on,
normal function.
Green flashing light:
Updating or
connecting, do not turn off the power.
Red light:
Starting. If the red light
persists: contact Bredband2.
Red flashing light:
Can’t connect
to internet.
Off:
The router has no power.
2. Internet
Green light:
Connected to
the network.
Off:
Connection to the
network failed.
3. WAN
Green light:
Connected to internet.
Green flashing light:
Data traffic is
being sent/received.
Off:
Not connected to the internet.
4. LAN
Green light:
Connected to other
devices with a network cable.
Green flashing light:
Connected
with a network cable and
generating traffic.
Off:
Not connected with a
network cable.
5. WiFi
Green light:
WiFi is active.
Green flashing light (slow):
Searching
for other devices using WPS
Green flashing light (short):
WPS
connection is working.
Green flashing light (fast):
WPS connection failed.
Off:
WiFi is active.
6. USB
Green light:
A device is connected
to the USB.
Off:
No device is connected to USB.
Access router browser interface
IP:
192.168.1.1
User name:
user
Password:
user
If you need information how to
configure parental control or
Port forwarding you will find the
information under guides on our
webpage
https://www.bredband2.
com/privat/kundtjanst/guider
Mesh
This router is compatible using an
EasyMesh-system which gives you
the possibility to connect one or
several Mesh-extenders to get full
coverage, if you can’t place the router
optimally or if you have a large home.
To pair your router with an extender
using WPS, first press the WPS-button
on the router for 12 seconds and then
press the WPS-button on the extender.
To connect the extender and your
router using a network cable, connect
the network cable in the LAN-port of
the router and the other end of the
cable in the WAN-port in your extender.
If your extender does not support WPS,
use the instructions for your extender.
Troubleshooting
1. Check that the power is on.
The power light should be on
(Status). See picture labeled “front”.
2. Is the power light off?
Check that the router is properly
connected to the power adapter.
Check that the power adapter is
connected to an electrical outlet.
If the router is properly connected
to an electrical outlet, a power light
that is still not on may indicate
a faulty router or a faulty power
adapter. Contact Bredband2.
3. Are the Status light flashing red
or is the Internet light red?
Contact Bredband2.
4. Is the WAN light off?
Check the connection between the
broadband outlet and the routers
WAN port (WAN). If the WAN light
is off, despite proper connection,
contact Bredband2.
5. Is the WiFi light not green?
Press the WPS button on the
back to activate WiFi.
6. Reset button.
See picture labeled “Back”.
This button resets your router to
factory settings. Use a pen or a
paperclip and press for 10 seconds.
Bredband2 contact information
Phone: 0770-811 000
Email: [email protected]
Website:
www.bredband2.com
