D-Box User's Manual
English
10 / 64
tiko Energy Solutions AG
IM-0007-0006 Rev. 5
Uninstalling
The D-Box can be uninstalled in 3 different ways:
Decommissioning
In the backend, the D-Box can be disabled. In this case, a relay inside the D-Box is closed
in such way that the wires are bridged. The D-Box remains in place, but the heater can
be operated manually.
Continuity Bridge
The D-Box is removed from the socket. The socket is bridged using the Continuity Bridge
CATA-01.1103-P1) displayed on
IMAGE 5
.
Complete Uninstallation
Step 1
Remove power from the electrical panel.
Step 2
Unhook the heater from its holders and put it to the side.
Step 3
Unplug the D-Box, open the socket and unscrew all wires.
Step 4
If the wires coming from the wall/source are long enough, they can be
clamped directly into the heater’s terminals. Otherwise, the cut wires
need to be bridged.
Step 5
Lift the heater back onto its holders and power on the system by ena-
bling power in the electrical panel.
Step 6
If the device remains property of
tiko Energy Solutions AG
or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
