12/12 4000017
1
Product Box Contents:
A.
1 Snuffer
B.
1 Fuel Canister (includes wick,
flame guard and canister)
C.
1 Top Half Bell Stand
D.
1 Bottom Half Bell Stand
E.
2 Bags of Decorative Rock
F.
1 Phillips/Hex Head Bolt,
M10 x 20 mm
Tools Required for Assembly:
•
1 Phillips Screwdriver
Save these instructions for future reference.
CAUTION
• Keep clothing, hair and face away from flame.
• Do not place Fire Sculpture under covered shelter or
umbrella, near pedestrian traffic or combustibles such
as wood structures, fuel, clothing or dry vegetation.
Fire Sculpture - Fuel Options
Fuel Canister - Fill with TIKI
®
Brand
Citronella or OFF! BiteFighter
®
Torch Fuel.
Instructions and Warnings
A
B
C
D
F
E
Fire Sculpture Assembly and Installation:
• Place the Top Half Bell Stand (C) upside down on a flat surface. Place
the Bottom Half Bell Stand (D) upside down on the top half and position
the alignment hole feature so no gap exists between the two sections
(see FIG 1).
FIG 1
Bottom Half
Bell
Stand (D)
Top Half
Bell
Stand (C)
WARNING
• Read and understand these instructions
before use!
• For outdoor use only!
• Keep out of reach of children and pets.
• Never leave a burning Fire Sculpture unattended.
• Hot while in Use.
• To prevent burn injuries, snuff and allow to
cool for 30 minutes before handling, refilling or
cleaning.
• Failure to follow Instructions and Warnings may
result in serious injury or property damage.
• Use only TIKI
®
Brand torch fuel - Do not use
gasoline or other flammable fuels.
• Do Not Overfill. Remove excess fuel from bowl
prior to lighting
• Never fill a burning Fire Sculpture
• Before refilling, carefully place the Snuffer over
the flame to extinguish.
• Torch fuel is harmful or fatal if swallowed.
Contains petroleum hydrocarbons.
• Do not use Fuel Canister outside of the Fire
Sculpture.
• Read Warnings on torch fuel container carefully.
