EN
Tiiwee Glass Break Alarm
Instructions for Use
Intended Use
Thank you for purchasing the new Tiiwee Glass Break Alarm. This glass break sensor with
integrated alarm is used to monitor glass windows and doors. It is stuck directly onto the
glass surface and an alarm will sound if the glass is smashed by forces or breaks. It
recognizes typical frequencies and sounds connected with those incidents. This device is only
designed for your personal safety and convenience and not for commercial or industrial use.
PRECAUTION:
The alarm is very loud. Don't expose yourself or others to the alarm
unnecessarily as this may result in damage to the hearing system.
Product Overview
Installation
•
Clean the glass thoroughly before mounting the device. Dirt can influence the
detection of breakage.
•
Make sure to mount the device at a position where you have easy access to the
device.
•
The unit is mounted directly onto the glass of the window or door, preferably near
the edge of the area. The slim design allows the mounting on sliding glass doors.
Sensitivity switch (Hi/Lo)
On/Off switch
LED Status light
Test button
Battery compartment
