USER GUIDE
- 7 -
© Tiitan Holding Co. All rights reserved.
Start to use
1 Insert SIM card
The phone is a Dual SIM mobile phone allowing you to use
the facility of two networks.
To insert SIM card(s):
1. Switch off the mobile phone and remove the rear cover.
2. Insert the SIM card correctly in the card slot(s).
3. Finally replace the rear cover of the mobile phone.
Note: SIM card support Micro SIM which is a new kind of
SIM for you. You can get it from operator or ask for
changing a Micro SIM in a mobile shop.
2 Insert Memory card
1. Power off the mobile phone and remove the rear cover.
2. Insert the Micro SD card into the slot.
3. Finally replace the rear cover of the mobile phone.
Note: Use only compatible memory cards for use with this
device. Incompatible memory cards may damage the card
or the device and corrupt the data stored in the card.
3 Charge the battery
During charging, the battery indicator on the phone is a
thunder icon. If the device is switched off during charging,
there will still be a charging indication on the screen that
shows the phone is being charged. If the device is
overused --when the battery is low, the charging icon
might take some time to appear.
When the battery indicator on the screen says 'charged',
thunder icon will disappear, which means the completion
of charging. During charging, the battery, the device and
the charger will get hot. This is
Normal. Unplug the charger from the AC electrical outlet
and disconnect the wiring between the phone and the
charger after charging. .
Cautions: Charge the phone in a well ventilated place in
which the temperature is between -10
℃
to +60
℃
. Use the
charger provided by the manufacturer only. The use of
unconfirmed charger may lead to dangers and violate the
manufacturer's warranty clause. If the temperature is too
high or too low during charging, the device will
automatically send a warning and stop charging to avoid
damage to the battery or any danger.
