Installation and Maintenance
T-Top Adjustable Clamp-On Outrigger Holders
Models 88965, 88966 & 88967
Directions for Use:
1.
This unit is a spring loaded mechanism.
2.
To move your outriggers from the resting position:
A.
Turn the T-handle counter clockwise approximately three turns, this will release the
inner pin set.
B.
Pull the T-handle down and move your outriggers to the fishing position.
C.
Once you have positioned your outriggers, release the T-handle, and the pins will set
back into place.
D.
Turn the t-handle clockwise until T-handle is tightened. Always confirm that your
T-handle is completely tightened, so that your manufactures warranty is not voided.
