For assistance with installation, call us at 507.246.3545
Driver’s Side
q
3.1 - Run cover behind seat belt.
q
3.2 - Loosely place the cover over the seat back.
q
3.3 - Tip seat back forward.
q
3.4 - Pull cover around seat back, fastening Velcro up the back.
q
3.5 - Work plastic trim around headrest holes through holes in seat cover.
q
3.6 - Pull Velcro flap from front of cover between seat back and bottom.
q
3.7 - Pull flap tight and fasten to Velcro on back of seat cover.
q
3.8 - Run front flap over seat adjustment lever, wires, and brackets.
q
3.9 - Pull front flap tight and fasten to Velcro on top flap.
Passenger’s Side
q
3.10 - Turn seat back cover 3/4 of the way inside out and pull over seat back.
q
3.11 - Line holes in cover up with headrest holes and work holes around plastic trim.
q
3.12 - Continue pulling the cover down over the seat, unrolling it as you go.
q
3.13 - Push front flap between seat back and seat bottom.
q
3.14 - Pull front flap tight and fasten to Velcro on seat back.
3 - Install Seat Back Cover
