5
Assembling. 1
Open the box and take out the Heater. Separate the handle,
inserted in Heater by pulling toward arrows
Assembling. 2
Fix the handle tightly according to the direction on diagram
with Bolt(M6X40) and Nut
본체
Handle
Separate by pulling toward arrow
Assembling. 4
Assemble the Guard using M5X10 Bolt.
Assembling. 3
Assemble the Heater on appointed position of wheel
Support Frame(described on diagram) with Bolt(M5X35)
and Nut According to diagram, After assembling wheel
and Wheel Axle, and fix with washer and pin.
GUARD
WHEEL SUPPORT FRAME
Wheel Axle
Wheel
Washer
Pin
Assembling. 5
Assemble Visor, Heater Interception and Heat
umbrella on the main body using M5X10 Bolt.
UMBRELLA
VISOR
HEARER
INTERCEPTION
Parts in Packing
Product assembly
16