Tiger TIGERFLEX MODA, General Assembly Instructions

Page: 9 / 32

09
Please retain instructions for future reference
Step 5:
FLOOR ASSEMBLY
• Measure corner to corner diagonally to make sure cabin floor is square. If both values are equal, your frame
is square. Realign the floor until square.
Do not trim .
Step 6:
FLOOR ASSEMBLY
(MODULE PACKS: H/J & Q*)
• From the “Door Board” (see Step 3) work your way across the frame, securing remaining floorboards
using 10x N30 per floorboard.
NOTE: YOU WILL NEED TO REMOVE THE 2 FLOORBOARDS AND LOGS
THAT WERE USED TO HOLD THE FRAME TOGETHER AS YOU COME TO THEM.
• Final floorboard may need to be trimmed. Measure as shown
and cut to size.
(Detail D)
*(No Q pack supplied with 6x6 Models)
1
1 2
2
D