3
1
Turn the inner stopper to remove it.
2
To keep beverages warm/cool longer, first pour a small amount of hot/cold water
into the main body and let it sit for one or two minutes.
Wash the inner flask, brim, and cap.
Discard the hot/cold water after preheating/precooling.
3
Pour hot/cold beverage into the main body.
Fill the jug to the filling limit shown below, but do not
overfill it.
If adding ice, break large pieces into small pieces
before placing them into the jug.
(Do not insert large cubes of ice.)
When making tea, it is recommended pour to
hot water into the jug and use tea bags.
(When tea leaves are inserted directly, the tea may discolor over time.)
Brim
Main body
* If pouring hot liquids into the pot, be
careful not to spill liquids on hands.
(Burns may result.)
How to Use
When Using for the First Time
Remove the inner stopper while
pinching the open/close lever
with fingers.
Beverage
Approx. 1cm
or 1/2inch
Inner stopper
Open/close lever
①
②
①
Maximum level
(Slightly less)
4
4
Place the inner stopper onto the jug.
Align the direction of the push lever and handle, and close the inner stopper securely.
5
Press the push lever before tilting the jug and pouring the beverage.
When the jug is full, the beverage will pour with just a slight tilt, so bring a cup close to the spout.
6
After pouring, hold the jug in an upright and level position,
and wait 2 to 3 seconds before releasing the push lever.
Main body
Hold the jug in an
upright position,
while pressing the
push lever.
Do not release the push lever while the jug is tilted.
A small amount of liquid may remain in the inner
stopper and spill out while carrying the jug.
Press the push lever
while the jug is in an
upright and level position.
Tilt the jug while
pressing the lever
to pour.
Release the
lever after 2
to 3
seconds.
Liquid remains in
the inner stopper.
Handle
Inner stopper
Slot
Catch
Push lever
Continue pressing firmly
until the left/right catch
fits into place and is heard
a “click” sound.
Handle
Push lever
The push lever and handle will not fit into place
unless the directions are properly aligned.
If the inner stopper is not securely inserted,
the contents may leak out.
Push lever
Push lever
