35
34
35
34
35
34
12
Cleaning and Maintenance
English
Removing and attaching the steam cap
Removing the steam cap
(1)
Insert your fingers into the indentation in
the lid and lift and remove the steam cap.
Steam cap
Note
●
Be careful when removing the steam cap
immediately after cooking, as hot condensation is
collected in it.
(2) Rotate the cap unit counterclockwise
to align the marking on the cap with the
unlock symbol
.
The unlock symbol is marked on the cap lid.
Cap lid
Cap unit
Unlock symbol
Turn the cap unit
until it stops.
Marking
(3) Lift and remove the cap unit from the cap lid.
Note
●
Do not remove the gasket or O-ring from the cap
unit. Securely reattach the gasket or O-ring if it
comes off. Make sure that the direction of the
gasket on the cap unit is correct.
Wet the O-ring if it is difficult to attach it.
●
Be sure to set the gaskets, etc. before using the rice
cooker. Failure to do so may allow steam to leak out
and prevent the food from cooking properly.
O-ring
Cap unit
Cap lid
Gasket
Attaching the steam cap
(1) Align the protrusions of the cap unit with the
indentations of the cap lid as shown in the
figure and fit the cap unit into the cap lid.
There are three indentations and protrusions each.
(2) Rotate the cap unit clockwise and align the
marking on the cap unit with the lock symbol.
The lock symbol is marked on the cap lid.
Marking
Lock symbol
Turn the cap unit
until it stops.
(3) Securely attach it to the rice cooker.
Power cord
Wipe it using a dry cloth.
Note
●
Do not immerse the power cord in or splash it with
water. Doing so may cause short circuits, electric
shock, or malfunction.
Removing and attaching the inner lid
Removing the inner lid
Lift the inner lid button and
pull the inner lid toward you.
Attaching the inner lid
Securely insert the left and right
tabs of the inner lid into the groove.
Note
●
Do not pull on the lid gasket or inner lid gasket. It cannot
be reattached once it is removed.
When the lid gasket or the inner lid gasket comes
off, contact the place of purchase.
Inner lid button
(1) Lift the inner lid.
(2) Remove it.
(1) Insert the tabs.
(2) Push in the lid until it clicks.
Tab
Groove
Inner lid gasket
Inner lid
Lid
Lid gasket
Do not remove the gasket.
Do not forcefully push or pull
the gasket. Doing so may
allow steam to leak, resulting
in malfunction.
