Options
Meaning
Early Dial
Default is “No”. Use only if proxy supports 484 response
Dial Plan
Prefix
Sets the prefix added to each dialed number
No Key
Entry
Timeout
Default is 4 seconds. This is the time lapse after entering a phone number for the IPPH 202 to begin
completing your call.
Use # as
Dial Key
This parameter allows users to configure the “#” keyto be used as the “Send / Enter” (or “Dial”) key. If
set to “Yes”, pressing this key will immediately trigger the sending of dialed numbers entered thus far.
In this case, this key is essentially equivalent to the “(Re)Dial” key. If set to “No”, this “#”key will then
be included as part of the dial string to be sent out.
Auto
Answer
Voice Mail
Default is NO. When set to yes the phone will automatically pick up
the call and turn the speaker on.
Voice Mail
UserID
This parameter defines the User ID (or extension number) of a 3rd
party voice mail system where the user may have an account. By
defining this Voice Mail extension, when the user presses the
“Message” button on the phone, an INVITE message will be sent to
that extension to allow the user to retrieve messages.
Off-hook
Auto-Dial
This parameter allows users to configure a User ID or extension number to be automatically dialed upon
off-hook. Please note that only the user part of a SIP address needs to be entered here. The IPPH 202
will automatically append the “@” and the host portion of the corresponding SIP address.
Enable Call
Features
Default is “No”. If set to “Yes”, Call Forwarding & Do-Not-Disturb are supported locally
Disable Call
Waiting
Default is “No”.
Default
Ring Tone
The user can setup up one number on each of the ring tones 1, 2 and 3. When a call is received from one
of these numbers, the respective ring tone will be generated.
Other Settings:
