background image

User Manual 

 

Model: IP Phone 202 

 

 

 

  

   

  

Table of Contents 

 

Recommendation: 

 

Please read the entire manual before using your new IPPH202.

  

  
  

1 Welcome  2 

 

2 What Is In the Package              2 

 

3 Product Overview .........................................................................................................2 

 

3.1 Key Features ..............................................................................................................2 

 

3.2 Hardware Specifications ...........................................................................................3 

 

4 Installation                 4 

 

5 Basic Operations                4 

 

5.1 Get Familiar with Function Keys            4 

 

5.2 Dialing or Making Calls              4 

 

5.2.1 Two dialing modes               4 

 

5.2.2 Call Hold                 5 

 

5.2.3 Call Flash                 5 

 

5.2.4 Call Transfer                5 

 

5.2.4.1 Blind Transfer               5 

 

5.2.4.2 Attended Transfer              5 

 

5.3 Receiving Calls                6 

 

5.4 Call Features                6 

 

6 Programming IPPH 202              7 

 

6.1 Default Manager (Administrator) Password         7 

 

6.2 Major Sets of Configuration Data  7 

 

6.3 Programming Using Web Browser           7 

 

6.3.1 Determine your VoIP device’s IP address         8 

 

6.3.2User Programming and Configuration          8 

 

6.3.3 Configuration Options and Explanations         9 

 

6.3.4 Saving the Configuration Changes           17 

 

6.3.5 Rebooting the IPPH 202             18 

 

6.4 Programming Using Keypad  19 

 

7 Test Your Setup                21 

 

8 Technical Support Contacts             21 

 

                                         

 

 

 

 

 

1. WELCOME 

 

   
IPPH 202 is an internet telephone set that features superb audio quality, rich functionalities, high 
level of integration, and compactness.  By converting analog voice for transmission over the 

Summary of Contents for IPPH 202



















Reviews: