1.800.661.4661
View demonstration videos and a
complete product list at
tigertool.com
Technical Support
Operating Instructions
Have What It Takes
Race Removal
CAUTION:
Always follow Manufacturers
recommendations when servicing bearing races.
1
Choose the adapter kit you require for your bearing
set/race number. Place the split ring over the disk
wedge (tapered faces together).
(Figure A)
2
Take the clamp plate and place on top of split ring and
disk wedge. Ensure holes are aligned, then insert the
Hex Flange Screws and tighten by hand.
(Figure B)
3
With the hub removed from the truck and placed on
its side, grab the clamp assembly with supplied Press
Spacer and insert it into the hub. The hex flange screw
heads should be facing towards the direction you
want to push the race. Align the grove in the split ring
with the minor diameter of the race. Using an impact
wrench, alternate between the two hex flange screws
applying even force until the clamp plate and disc
wedge have come in to contact.
(Figure C)
4
For removing inner race, place the Spacer Ring on the
shop-press platform and with the Press Spacer still
in place, place hub (race facing downward) directly on
top of Spacer Ring. The spacer ring provides additional
depth for the race to be pressed out. Spacer ring is not
required for outer race removal.
(Figure D)
5
Engage shop-press (ensuring full contact with
Press Spacer) until bearing race is pressed out.
A
B
C
D
Bearing Race Starter Kit
10908
