Tiger Serve Assembly Guide
Site Installation: Connecting The Appliance to The Power
9
To install the bezel:
1.
Insert the tabs on each end of the bezel into the flanges on each side of the
appliance's front panel.
2.
Screw the two thumb screws on either side clockwise.
Connecting The Appliance to The Power
Your Tiger Serve is shipped with two power supply modules, installed in the rear of
the appliance. These modules supply redundant power to Tiger Serve - should a power
supply module fail, you can replace it while the system is operating (see “Replacing a
Failed Power Module” on page 21). You can replace a failed power module only with a
power module of the same model.
