Project Serve Assembly Guide
Site Installation: Site Installation
5
Rear View
The back of the appliance features the following elements:
•
2 x power supply modules.
•
System power button and system reset button.
•
1 x Public 1GbE port for network communication.
•
1 x Admin 1GbE port acting as a safety net in case of network misconfiguration.
•
Depending on the configuration you have purchased, additional:
•
1 Gb Ethernet port(s);
•
10 Gb Ethernet port(s);
Project Serve supports the following types of cables for connection to the network:
Clients via 10GbE —
depending on the 10GbE adapter model:
•
fibre optic cable with LC connectors for SFP+ transceiver or copper cable with
SFP+ transceiver.
•
patch cable with RJ-45 modular connectors.
Clients via 1GbE —
patch cable with RJ-45 modular connectors.
Site Installation
Unpacking Project Serve
Important:
Do not throw away any of the packaging components, until you
ensure that the appliance works properly and there is no need to return any
part.
Tip:
It is advisable to keep all packaging components until the warranty of
your appliance expires.
1.
Cut the straps of the box, cut or remove the tape and open the flaps.
