Connecting to a VCR or DVD player:
a. Make sure the VCR or DVD player is
properly connected to your TV.
b. Insert the white plug into the white
audio-in jack on your VCR or DVD
player.
c. Insert the yellow plug into the
yellow video-in jack on your VCR or
DVD player.
d. Turn on your TV and VCR or DVD player.
e. Set your TV and VCR or DVD player to the channel/
video input mode directed by your TV, VCR or DVD
player owner’s manuals.
Connecting to a TV:
a. Insert the white plug into the
audio-in jack (usually white) on
your TV.
b. Insert the yellow plug into the video-
in jack (usually yellow) on your TV.
NOTE
: These jacks are normally found on
the front of the TV near the adjustment controls, or on the
back of the TV near the antenna and cable connections.
c. Turn on your TV.
d. Set your TV to the channel/video input mode directed
by your TV owner’s manual.
Snap together the
3 tower pieces as
shown. Assembly
is permanent
— please don’t try to
disassemble tower
after it
has been
snapped
together.
(See Troubleshooting Guide on p.12,
if necessary, for further information.)
POWER
STEREO
TIMER/
STAND BY
- CHANNEL +
- VOLUME +
TV/VIDEO
DEMO
VIDEO
VIDEO 2 INPUT
L AUDIO R
3.
Connect AV cable
2.
Assemble tower
3