Tiger Electronics Star Wars Darth Maul 88-308 Instruction Download Page 2

PRINTED IN CHINA

®, TM, & © 1999 Tiger Electronics, Ltd. All rights reserved.

980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.

®, TM, & © 1999 Tiger Electronics UK Ltd. All rights reserved.
Belvedere House, Victoria Avenue,
Harrogate, North Yorkshire HG1 1EL, England.

www.tigertoys.com

12. RANDOM PLAY/SKIP AND SEARCH 

FUNCTIONS

RANDOM
This enables all the tracks on a disc to be played in a random (RAND) 

sequence.
For example: if RAND is selected while playing track 8, the random 

function will begin operating when track 8 has finished playing.  
When all the tracks on the disc have been played in the random mode, 
the CD player will automatically stop and power down in one minute to 

conserve battery life.

To select RAND mode, push the MODE button four times during play.  

Pressing MODE once more will return the unit to NORMAL play mode.

11. Intro Scan and Programmed Track Play

INTRO
To listen to the first 10 seconds of each song on the disc use the INTRO 

feature.  To initiate INTRO, press MODE button three times while the disc 
is playing.  If you wish to start the disc in INTRO mode, press MODE 
button three times and then press 

13. ELECTRONIC ANTI-SHOCK OPERATION

IThis player incorporates an electronic anti-shock circuit to help prevent 

interruption of the sound output when the unit is subjected to shock or 
vibration during disc playback.  If in use the player is likely to be subjected 

to shock or vibration (i.e. while walking or if used in a vehicle) press the 

anti-shock button to provide uninterrupted playback.
When the anti-shock button is pressed in the play mode, the display will 
show   and the function is initialized.  When   shows in the display, the 
data buffer is full.

14. PLAYER MAINTENANCE

Cleaning the Cabinet

Wipe with a soft cloth.  If the cabinet is very dirty, dampen the cloth with 
a weak solution of neutral detergent and water, then wipe clean.

Dust or Dry Particles

Using a camera lens brush / blower, blow on the lens a couple of times, 

then wipe it lightly with the brush to remove dust.  Then, blow on the 
lens once more.

Fingerprints

If the lens cannot be cleaned using the brush / blowing method, use a 

cotton swab starting in the middle and work to the outside edge.

15. DISC CLEANING AND 

TROUBLESHOOTING GUIDE

When a disc becomes dirty, clean it with a cleaning cloth.  Wipe the disc 

from the center out.

PROGRAM
This allows selected tracks on the disc to by played in any desired order.
To set the program play
Note:
  Programs can be set in the STOP mode.

1. Press the PROGRAM button when 

the unit is in the stop mode. The 
track number will appear in the 

display with the 

 indicator 

flashing.

2. Press 

 or 

 to select the 

desired track.

3. Press the PROG button to enter 

the track into memory.

4. Repeat steps 2 and 3 to program up 

to 24 tracks into memory.

5. Press 

 to start the programmed play.

6. To erase the program, press the   STOP button twice.

Note:  Do not use solvents such as benzene, thinner, commercially 

available cleaners or anti-static spray intended for analog discs.
Should you experience difficulties in the use of this player, please refer 
to the following chart or call 1- 888-844-7767 for customer service.

16. 90-DAY LIMITED WARRANTY

Tiger Electronics, Ltd. (Tiger) warrants to the original consumer purchaser of 
this product that the product will be free from defects in materials or 
workmanship for 90 days from the date of original purchase.  This warranty 
does not cover damages resulting from accident, negligence, improper service 
or use or other causes not arising out of defects in materials or workmanship.
During this 90-day warranty period, the product will either be repaired or 
replaced (at Tiger’s option) without charge to the purchaser, when returned 
with proof of the date of purchase to either the dealer or to Tiger.
Product returned to Tiger without proof of the date of purchase or after the 
90-day warranty period has expired, but prior to one year from the original 
date of purchase, will be repaired or replaced (at Tiger’s option) for a service 
fee of U.S.$60.00.  Payments must be by check or money order payable to 
Tiger Electronics, Ltd. 
The foregoing states the purchaser’s sole and exclusive remedy for any 
breach of warranty with respect to the product.
All product returned must be shipped prepaid and insured for loss or damage 
to:

Tiger Electronics, Ltd. Repair Dept.
980 Woodlands Parkway, 
Vernon Hills, Illinois 60061, U.S.A.

The product should be carefully packed in the original box or other packing 
materials sufficient to avoid damage during shipment.  Include a complete 
written description of the defect, a check if product is beyond the 90-day 
warranty period, and your printed name, address and telephone number.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER 
REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON 
OR OBLIGATE TIGER IN ANY WAY.  ANY IMPLIED WARRANTIES APPLICABLE 
TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) 
DAY PERIOD DESCRIBED ABOVE.  IN NO EVENT WILL TIGER BE LIABLE 
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES 
RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER 
PRODUCT.
Some states do not allow limitations as to how long an implied warranty lasts 
and/or exclusions or limitations of incidental or consequential damages, so 
the above limitations and/or exclusions of liability may not apply to you. This 
warranty gives you specific rights, and you may also have other rights which 
vary from state to state.
For more information about Tiger Electronics, our products and special 
promotions, please visit our Web Site at: www.tigertoys.com

Locating a Particular Track
To return to the beginning of the current or a previous track, press the 

 lightly and repeatedly.

To move to the beginning of each subsequent track, press the 

 lightly 

and repeatedly.

Locating a Particular Point in a track
To search backward at high speed, press and hold the 

 button.

To search forward at high speed, press and hold the 

 button.

Low level audio will be heard during the search process to assist in 

locating the correct point in the track.

The sound will mute for approximately 1 second while the buffer fills.  
Once filled the buffer will give approximately 10 seconds of protection 

against interruption of sound output.  If the player is subjected to shocks 
of over 10 second duration some interruption of sound output will occur. 

This is normal and to be expected and the sound will resume once the 
player has stabilized from the shock.
To turn this function off, press the ANTI-SHOCK button again.

If you experience trouble with this equipment, please contact the following 

address and phone number for information on obtaining service or repairs.

Company:

Tiger Electronics, Ltd., Repair Dept.

Address:

980 Woodlands Parkway

Vernon Hills, IL 60061, U.S.A.

Tel. No.

847-913-8100

TROUBLESHOOTING GUIDE

PROBLEM

THINGS TO CHECK

Player fails to function

Disc may be inserted upside down.
Disc not mounted correctly on chuck
Dirty or defective disc
Dirty pick up lens
Player lid is not closed properly
Moisture / condensation, slowly warm 

player up to room temperature for 60 

minutes
AC power to adaptor is switched off
Weak batteries
Auto power off has occurred, press 
play button to restore power

No sound from Headphones

Headphone plug is not firmly inserted 

into the green PHONES socket.

No sound when played 
through an external amplifier

Connection is incorrect
Power to external amplifier not 

switched on

Intermittent sound

Dirty or defective disc
Dirty pick up lens
Player is subject to excessive vibration 

or shock
Low battery power
Poor Headphone connection

MODE

3

 press

During play

Track no. of the first desired selection

The second selection

MODE

4

 press

During play

Notes:
1. When using the ANTI-SHOCK function the battery power consumption 

increases because the disc rotates faster than normal and the dynamic 
memory is active.

2. While the ANTI-SHOCK function provides for continuous sound output 

when the unit is subjected to shock or vibration, it will not correct 
errors arising from the use of defective, scratched or dirty discs.

3. When powering the player solely from batteries, only use the ANTI-

SHOCK function where necessary to preserve battery life.

PROG

1

 press

During STOP mode

© Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.

ASP Indicator

ASP Indicator

ASP Indicator

Reviews: