background image

TELEPHONE CONTROLS
AND FEATURES

Item No.: 59917

Ages 7 & Up

EAR PIECE/SPEAKER
MICROPHONE
HEADSET CORD
REDIAL BUTTON

- Redials the last number called

FLASH BUTTON

- Lets you retrieve a dial tone after ending a call

TALK SWITCH

- Turns the phone on and off

DIALING KEYS
VOLUME CONTROL

- Controls the reception volume

SOUND EFFECT BUTTONS
EAVESDROPPER DETECTOR SWITCH

- Turns the eavesdropper detector on and off. If someone picks 

up a phone on the same line, the eavesdropper detector will tell 
you "SOMEONE IS LISTENING". When it’s safe to talk, My Private
Line will announce “SAFE TO TALK!”

BELT CLIP

INSTALLATION

Line Cord Connection

With a modular telephone system,
connect the 10 feet of straight telephone
line cord included with the phone to
the modular jack located on the bottom
of the handset (Figure 1).

OPERATION

Receiving a Phone Call

When your phone rings, pull out the cable with the ear bud and
place the ear bud comfortably in your ear and press the TALK switch.
Make sure the microphone is positioned closer to your mouth. Clip
the base unit to your belt.

Dialing a Call

Pull out the cable with the ear bud and place the ear bud comfortably
in your ear. Press the TALK switch and wait for the dial tone. Press
the dial buttons for the number you want.

To Hang up

Press the TALK switch again to hang up the line.

To Return the Cord to the Base Unit

Press the button on the back of the unit to retract the cord. Cord
will retract automatically. Replace the ear bud into the slot.

Eavesdropper Detector

When the Eavesdropper Detector is turned on, a security alert is
activated and you hear “SOMEONE IS LISTENING!” when an unwanted
third party picks up an extension on the same line. When the
unwanted party hangs up, the phone lets you know that it is “SAFE
TO TALK!” The Eavesdropper Detector can be turned off so that
other extensions on the same line can be used during a conversation.

Sound Effects

This phone includes three sound effects that you can choose to play
during your telephone conversation. F/X 1= Door Bell, F/X 2=
Scream, and F/X 3= Telephone Ring.

Redial

If the line is busy when you call someone, or you want to call back
someone you just called, there is no need to dial the number again
manually. When pressed, the REDIAL button automatically redials
the most recently dialed number. Press the TALK switch to TALK.
When you hear a dial tone press REDIAL instead of dialing the
number.

Flash

The FLASH button is used to retrieve a new dial tone after ending
a call without having to turn the phone on and off.

NOTE:

 The FLASH button is also a useful feature for special

telephone services such as call waiting, if you subscribe to this
service. Press FLASH briefly, release and perform the custom call
procedure.

Volume Control

My Private Line transceiver features a dial control to regulate the
volume of the reception. If you are having trouble hearing the person
your are talking to, increase the volume until it is at a desirable
level. If the reception is too loud, decrease the volume until it is at
a desirable level.

TROUBLESHOOTING

No Dial Tone

- Check all modular plug connections to make sure they are

securely connected.

- Problem with the wiring. Try another phone jack. If the phone

works on another jack, you may have a problem with your wiring.
Contact your local phone company.

Redial Function Does Not Operate

- Check if the last number you intended to call was really the last

number you dialed.

Phone Does Not Ring

- Too many telephones may be installed on the same line. Contact

your local telephone company to determine the maximum number
of extensions for your calling area.

Sound Volume Is Too Low

(Figure 2)

Insert the other end of the cord into a
modular wall jack (Figure 2). Make sure
all plugs snap firmly in place.

(Figure 1)

INSTRUCTIONS

Press the button on the back of
the unit to retract the cord. Cord
will retract automatically. Replace
the ear bud into the slot.

Reviews: