T-820+ Motherboard
Page 8
2.4.3 SDRAM Sockets
There are two SDRAM sockets on-board to provide more flexibility for your system
memory upgrade. Because the number of pins are different on either side of the
breaks, the DIMM module will only fit the 3.3V 168-pin unbuffered for this
motherboard.
168-Pin SDRAM Module Installation Diagram
2.4.4 PCI Slots
This motherboard provides five full-length 32-bit PCI slots with up to 133MB/sec
burst data transfer rate.
2.4.5 AGP Slot (Accelerated Graphics Port)
This motherboard provides the AGP 2.0 interface, The AGP Interface Specification
revision 2.0 enhances the functionality of the original AGP Interface Specification
(revision 1.0) by allowing 4X data transfers (4 data samples per clock) and 1.5 volt
(power supply) operation.
2.4.6 AMR Slot (Audio Modem Riser)
This connector supports a specially designed audio and/or modem card called an
AMR.
2.4.7 Floppy Drive Connector (34-Pin)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the on-board
“
FLOPPY
”
connector, connect the remaining
plugs on the other end to the floppy drives correspondingly.
3 . 3 V K e y
U n b u ff e r e d
D R A M K e y
2 0 P in s
6 0 P in s
8 8 P in s
L o c k
T w o D I M M S o c k e t
