Tiffin Motorhomes WAYFARER 2021, Owner'S Manual

Page: 76 / 170

BEDROOM AREA CONTINUED
REAR KING BED SETUP
• Depending on model, to convert the rear 76"x32" twin bed configuration to a
86"x76" king bed configuration pull the bed support between the two cushions from its
stored position and pull towards the front of the motorhome (Figure 68.1 and 68.2).
• Bed support will run from rear of cushions all the way to the front of the cushions
(Figure 68.3).
• Slide bottom cushions together and fill in the outside with the side cushions (Figure 68.4).
• Restore the bed to it's original position when traveling long distances, this will prevent
damage to the center support.
Figure 68.1
Twin Bed Configuration
Figure 68.2
To Convert To King Bed, Pull the Center Support
From Its Stored Position and Pull Towards Front of
Motorhome
Figure 68.3
Center Bed Support Fully Extended
Figure 68.4
Slide Bottom Cushions Towards the Middle and Fill
In with Back Rest Cushions to Make Up Your
86"x76" King Size Bed
68