STEP 1
After unpacking lockers, align left to right with
multiple door side opening facing you as pictured
under STEP 5 to the right.
STEP 2
Bolt lockers together in four places on the front
and back as shown in DETAIL A.
Evidence Locker Installation Instructions
STEP 3
If the sides of the locker will be visible,
install the evidence end trim panels. End panel
installation instructions are on page 8.
STEP 4
If end trim was ordered for a recessed locker,
clamp the vertical trim components keeping
the trim flush and centered with the front of the
lockers.
STEP 5
Attaching trim with no end panels -
To attach the trim to the frame, drill 3/16” holes
in the locker frame to match the holes in the
vertical trim. Use the included sheet metal
screws to attach the trim to the frame.
If you are attaching trim with end panels, see
Steps 6 & 7. If you are not using end panels
move on to STEP 8.
STEP 6
Attaching trim with end panels -
If end panels were installed per instructions on
page 8, drill holes in the end panels to match the
holes in the trim sections.
6
RIGHT HAND TRIM ANGLE
EVIDENCE END PANEL
LEFT HAND TRIM ANGLE
