Tiffin Motorhomes 2015 Allegro, Owner'S Manual

Page: 79 / 152

72
EXTERIOR FEATURES
TOWING HITCH
EXTERIOR SIDES
On the rear of the Allegro is a Class 2, 5,000-pound
towing hitch (Figure 11-1) capable of handling a
tongue weight of 500 pounds.
This hitch is installed for towing a passenger car
to be used when the vehicle is parked. The wire
connector installed with this hitch is a standard,
seven-pin connector.
The sides (Figure 11-2) of your Al-
legro are constructed of gel-coated
fiberglass.
To add to this feature, the end caps
are also gel-coated fiberglass. To
clean these fiberglass surfaces, only
use warm water and a mild cleanser;
gently wash with soft cloths. Use of
stiff bristle brushes or other harsh
abrasives may cause scratches in the
fiberglass surfaces.
Please note: Tiffin Motorhomes is
NOT responsible for the weathering
and/or oxidation of gel-coated sur-
faces.
Spacious storage compartments are located on the exterior sides of your Allegro. These external com-
partments provide ample, additional space for your belongings while you are traveling. When stowing
materials in these storage compartments, try to “balance” the resultant weight load from front to rear
and from side to side—this will keep the center of gravity of the motor home essentially unchanged and
should not adversely affect the handling characteristics of the motor home when it is in motion.
Figure 11-1:
Towing hitch
Figure 11-2:
Exterior of Allegro