Tiffen steadicam aero, Operator'S Manual, Page: 14 / 62

Assembling the AERO Sled
Add your choice of battery mount to the
opposite end of the Cross Rod. A complete list
of available mounts is on page 7.
First, remove any weights from the Cross Rod
(your AERO comes out of the box with balance
weights installed on both ends of the Cross
Rod; you may need to reinstall these later
when you balance your AERO).
We suggest operating with the monitor at a
45˚ angle to the Cross Rod. This is adjustable
by loosening the Monitor Mount Knob with one
hand while supporting and adjusting the
monitor with the other.
Once you’ve adjusted the angle to your liking,
re-tighten the Monitor Mount Knob.
Second, remove the Battery Mount Locking
Shaft, slide the Battery Mount onto the Rod
and reinstall the Battery Mount Locking Shaft.
10