TO WALL MOUNT THE VACUUM CLEANER
The charging base can be mounted vertically or placed on a horizontal surface such as a counter or shelf.
1. Pick a convenient position that is within 1m of a power outlet. If the charging base is closer than 1m,
wrap any excess cord around the charging base.
NOTE:
The charging base should be mounted on the wall, so that the dust canister is pointing
downward when the portable vacuum is placed in the charging base.
2. If wall mounting, place the charging base in the desired location (ensure that is a clean, dry area)
and mark the centre of one of the holes.
3. Drill a hole through the centre of the hole. Push a plastic wall anchor into the drilled hole.
4. Insert one of the included screws and turn it until it is secure.
5. Re-check the second hole alignment and complete steps 3-4 again.
6. The charging base should be securely fixed to the wall.
WARNING:
The appliance must be positioned so neither the appliance itself nor its power supply
can be reached by children and/or mentally disabled people.
BATTERY CHARGING PROCEDURE
1. Plug the charger into the power supply.
2. Ensure the vacuum cleaner is switched off before charging.
3. Align the jack connector with the slot so it fits in the groove.
4. Slide the vacuum cleaner downward onto the charging base making sure it firmly locks on, and that
the charger is firmly inserted into the vacuum. The red indicator light will illuminate.
5. To maintain a charge, keep the charger plugged into a power outlet. When charging, the charger
may be warm to touch, but this is normal. Always charge the vacuum after each use to extend the
life of the battery.
NOTE:
If the device is used until the battery is flat, it should be charged continuously for 14 hours.
OPERATING THE VACUUM CLEANER
1. Ensure that the filter is correctly installed.
2. Ensure you have let the vacuum charge for 24 hours if it is being used for the first time, 14 hours
from the battery being flat, or 2 hours from the last short use.
3. Remove the device from the charging base.
4. If an attachment is needed, attach it to the appliance opening, otherwise use it as is.
5. Slide the button forward to the ‘On’ position; the vacuum will begin to work.
6. Commence the cleaning task, and ensure the suction nozzle always points downwards. It is
recommended that you turn the appliance off between cleaning tasks to conserve power.
NOTE:
Use your vacuum to pick up any dry debris before picking up any wet spills.
NOTE:
Empty the canister and clean the filter:
•
When the suction power decreases.
•
Crumbs come out of the nozzle.
•
Debris reaches the max fill line.
•
After each use.
