7
S21-037
ENGLIS
H
S
V.
PROGRAMMING
1.
Programming standard dose
Follow the instructions below for programming coffee dosage for drink buttons.
Step 1:
Press and hold the 1 Shot espresso
button or 2 Shot espresso
buttons
for 3 seconds to start to program on that one. Siren sounds and
the selected button begin flashing.
Step 2:
Press the
Stop button to dispense coffee and press it again
when reaching the desired coffee dose. The Stop button light is on while dispensing.
Step 3:
Press and hold the programmed button for 3 seconds to save its new dose
and finish the setting process.
Repeat the procedure above for programming on the remaining button.
2.
Pre-infusion
•
To enable the pre-infusion mode, press and hold the button for 3 seconds
until the siren sounds.
•
Do similarly the step above to disable it
Note:
The coffee dose on buttons needs to be reprogrammed for it to work
correctly.
3.
Setting of operational parameters
In addition to the core functions, a machine’s operational parameters can be changed
to improve the user experience.