21
This warranty does not cover batteries, improper
handling, not intended purpose, opening the housing,
improper storage or damages from accidents.
No other warranties such as fitness for a particular
purpose will be given.
We are not liable for any indirect, incidental or conse-
quential damages or losses arising from any cause or
theory.
9. Technical data ZAP 350L
Nominal voltage range:
50 ... 500 V AC/DC
Nominal frequency range:
0 ... 2000 Hz
Input resistance:
direct (high-impedance)
ca. 150-190 kΩ
switched
(fast start up) 150 Ω
Current peak value I
s
:
direct: < 3,5 mA
switched: 1,5 A / 230 V
On-time:
30 s
Display:
high-impedance,
direct reading:
red LED for voltage
red LED for phase test
LCD, backlight
low-resistive connected:
additional display symbol
for connected load
Phase/Phase sequence:
capacitive,
without accessible electrode
tests possible with gloves
arrows for phase sequence
POL for phase unipolar
Polarity:
voltage type - / ~
Continuity:
0 ... 1000 kΩ
Connectible load:
approx 350 W at 230 V
Overvoltage protection:
automatic switch-off of load
at > 260 V
Overload protection:
thermo-switch,
thermo-point at > 70°C
Power supply:
Voltage tests from the mains
integrated Longlife-Li-battery
> 10 years operating time for
normal daily use
Overvoltage category:
CAT IV 500 V
Surge voltage strength:
>12 kV (1,2/50 µs)
Test voltage:
6 kV
Operating temperatures:
-15 ... + 45°
Casing:
unbreakable silicone rubber,
display cover made of impact
resistant polycarbonate
Protection category:
IP 65,
device can be used in moist
environments
Connecting line:
Patented thermo line
Ø 10 mm / 1,8 m
doppelt isoliert,
PA-thermo protection
meshwork
Standards:
IEC 61243-3:2009
EN 61243-3:2010
DIN-EN 61243-3:2011
EMV requirements:
DIN-EN 61326
Dimensions/Weigth:
274 x 75 x 47 mm
(display part) 510 g